Power is becoming costly by each passing day and more people are getting interested in using solar energy to meet their electricity needs. Solar PV panels confer a much fine option.
Solar power is a renewable source of energy that is gaining ground because of the benefits it offers. Solar energy panels serve the purpose of absorbing solar energy and converting it to electric power through the photovoltaic effect. Most homes have a roof or a backyard which can be utilized to install solar panels and produce electricity.
A Residential Solar System must provide enough electric energy to fulfill all the power requirements of a home. It should also be capable of providing AC power as traditionally all homes use AC power to operate lighting systems, gadgets, appliances and equipment such as computers, refrigerators, mixers, fans, air conditioners, TVs and music systems.
There is no more distinction in cost amid imported and local solar panels.
There are two kinds of Solar PV Cells: Monocrystalline and Polycrystalline. The distinctness betwixt the two is that Monocrystalline is built up of single silicon crystal whereas Multi-crystalline PV is constituted of multiple crystals. A monocrystalline is much accomplished in turning solar power into electricity per sq meter area than a multi-crystalline PV. Thus the space needed for the same amount of wattage is less in monocrystalline PV panel. Thus it is costlier than a Multi-crystalline PV. Kindly note that lower the efficiency, more panels you would need to get the same amount of electricity and it will occupy more rooftop area.
A home solar power plant comprises several elements which are as follows:
It requires the adequate number of solar panels to absorb as much solar energy as possible. When introduced to direct sunlight a typical home solar panel produces about 300 watts in one hour which means that in a normal day during summer, comprising 10 hours of sunlight, it can produce around 3000 watts or 3 kWh per day. This could vary depending on the number of hours of sunshine received during the day.
The system requires a battery which can be charged by the solar power generated and also can store electric power to be used in the night.
Batteries are typically used in off-grid systems.
The system needs an inverter to convert the DC power generated to AC power so that it can be used by the appliances or devices in the home.
The entire residential solar system is interconnected with adequate and appropriate cabling and wiring to channelize the energy into a usable form.
When sunlight falls on the Solar Panel System it gets absorbed by the PV cells and the silicon semiconductors in the cells convert solar energy into electric energy through the PV effect. This electric energy is in the form of DC power which can directly charge the battery. The DC power in the battery is sent to an inverter which converts it into AC power.
Funding in rooftop solutions leads to great savings, while protecting the environment.
The former decade has engendered the era of solar panels for home use. Homes and businesses across the country are transitioning away from a fossil-fueled electricity grid towards a clean energy economy, necessitated by emissions reduction targets in a time of global climate variation. Amidst this season of energy reform, solar panel systems for houses are taking off at a remarkable rate.
Learn everything there is to know about the booming residential solar systems. The price of solar is falling across the state. See prices in your area and get the best services from Arise Solar.
